NAME

puppet-agent - The puppet agent daemon

SYNOPSIS

Retrieves the client configuration from the Puppet master and applies it to the local host.

This service may be run as a daemon, run periodically using cron (or something similar), or run interactively for testing purposes.

USAGE

DESCRIPTION

This is the main puppet client. Its job is to retrieve the local machine´s configuration from a remote server and apply it. In order to successfully communicate with the remote server, the client must have a certificate signed by a certificate authority that the server trusts; the recommended method for this, at the moment, is to run a certificate authority as part of the puppet server (which is the default). The client will connect and request a signed certificate, and will continue connecting until it receives one.

Once the client has a signed certificate, it will retrieve its configuration and apply it.

USAGE NOTES

´puppet agent´ does its best to find a compromise between interactive use and daemon use. If you run it with no arguments and no configuration, it goes into the background, attempts to get a signed certificate, and retrieves and applies its configuration every 30 minutes.

Some flags are meant specifically for interactive use --- in particular, ´test´, ´tags´ and ´fingerprint´ are useful.

´--test´ runs once in the foreground with verbose logging, then exits. It also exits if it can´t get a valid catalog. --test includes the ´--detailed-exitcodes´ option by default and exits with one of the following exit codes:

0: The run succeeded with no changes or failures; the system was already in the desired state.
1: The run failed, or wasn´t attempted due to another run already in progress.
2: The run succeeded, and some resources were changed.
4: The run succeeded, and some resources failed.
6: The run succeeded, and included both changes and failures.

´--tags´ allows you to specify what portions of a configuration you want to apply. Puppet elements are tagged with all of the class or definition names that contain them, and you can use the ´tags´ flag to specify one of these names, causing only configuration elements contained within that class or definition to be applied. This is very useful when you are testing new configurations --- for instance, if you are just starting to manage ´ntpd´, you would put all of the new elements into an ´ntpd´ class, and call puppet with ´--tags ntpd´, which would only apply that small portion of the configuration during your testing, rather than applying the whole thing.

´--fingerprint´ is a one-time flag. In this mode ´puppet agent´ runs once and displays on the console (and in the log) the current certificate (or certificate request) fingerprint. Providing the ´--digest´ option allows you to use a different digest algorithm to generate the fingerprint. The main use is to verify that before signing a certificate request on the master, the certificate request the master received is the same as the one the client sent (to prevent against man-in-the-middle attacks when signing certificates).

´--skip_tags´ is a flag used to filter resources. If this is set, then only resources not tagged with the specified tags will be applied. Values must be comma-separated.

OPTIONS

Note that any Puppet setting that´s valid in the configuration file is also a valid long argument. For example, ´server´ is a valid setting, so you can specify ´--server servername´ as an argument. Boolean settings accept a ´--no-´ prefix to turn off a behavior, translating into ´--setting´ and ´--no-setting´ pairs, such as --daemonize and --no-daemonize.

See the configuration file documentation at https://puppet.com/docs/puppet/latest/configuration.html for the full list of acceptable settings. A commented list of all settings can also be generated by running puppet agent with ´--genconfig´.

--certname: Set the certname (unique ID) of the client. The master reads this unique identifying string, which is usually set to the node´s fully-qualified domain name, to determine which configurations the node will receive. Use this option to debug setup problems or implement unusual node identification schemes. (This is a Puppet setting, and can go in puppet.conf.)
--daemonize: Send the process into the background. This is the default. (This is a Puppet setting, and can go in puppet.conf. Note the special ´no-´ prefix for boolean settings on the command line.)
--no-daemonize: Do not send the process into the background. (This is a Puppet setting, and can go in puppet.conf. Note the special ´no-´ prefix for boolean settings on the command line.)
--debug: Enable full debugging.
--detailed-exitcodes: Provide extra information about the run via exit codes; works only if ´--test´ or ´--onetime´ is also specified. If enabled, ´puppet agent´ uses the following exit codes:

: 0: The run succeeded with no changes or failures; the system was already in the desired state.
: 1: The run failed, or wasn´t attempted due to another run already in progress.
: 2: The run succeeded, and some resources were changed.
: 4: The run succeeded, and some resources failed.
: 6: The run succeeded, and included both changes and failures.

--digest: Change the certificate fingerprinting digest algorithm. The default is SHA256. Valid values depends on the version of OpenSSL installed, but will likely contain MD5, MD2, SHA1 and SHA256.
--disable: Disable working on the local system. This puts a lock file in place, causing ´puppet agent´ not to work on the system until the lock file is removed. This is useful if you are testing a configuration and do not want the central configuration to override the local state until everything is tested and committed.

: Disable can also take an optional message that will be reported by the ´puppet agent´ at the next disabled run.
: ´puppet agent´ uses the same lock file while it is running, so no more than one ´puppet agent´ process is working at a time.
: ´puppet agent´ exits after executing this.

•: --enable: Enable working on the local system. This removes any lock file, causing ´puppet agent´ to start managing the local system again However, it continues to use its normal scheduling, so it might not start for another half hour.

: ´puppet agent´ exits after executing this.

--evaltrace: Logs each resource as it is being evaluated. This allows you to interactively see exactly what is being done. (This is a Puppet setting, and can go in puppet.conf. Note the special ´no-´ prefix for boolean settings on the command line.)
--fingerprint: Display the current certificate or certificate signing request fingerprint and then exit. Use the ´--digest´ option to change the digest algorithm used.
--help: Print this help message
--job-id: Attach the specified job id to the catalog request and the report used for this agent run. This option only works when ´--onetime´ is used. When using Puppet Enterprise this flag should not be used as the orchestrator sets the job-id for you and it must be unique.
--logdest: Where to send log messages. Choose between ´syslog´ (the POSIX syslog service), ´eventlog´ (the Windows Event Log), ´console´, or the path to a log file. If debugging or verbosity is enabled, this defaults to ´console´. Otherwise, it defaults to ´syslog´ on POSIX systems and ´eventlog´ on Windows. Multiple destinations can be set using a comma separated list (eg: /path/file1,console,/path/file2)"

: A path ending with ´.json´ will receive structured output in JSON format. The log file will not have an ending ´]´ automatically written to it due to the appending nature of logging. It must be appended manually to make the content valid JSON.
: A path ending with ´.jsonl´ will receive structured output in JSON Lines format.

--masterport: The port on which to contact the Puppet Server. (This is a Puppet setting, and can go in puppet.conf. Deprecated in favor of the ´serverport´ setting.)
--noop: Use ´noop´ mode where the daemon runs in a no-op or dry-run mode. This is useful for seeing what changes Puppet would make without actually executing the changes. (This is a Puppet setting, and can go in puppet.conf. Note the special ´no-´ prefix for boolean settings on the command line.)
--onetime: Run the configuration once. Runs a single (normally daemonized) Puppet run. Useful for interactively running puppet agent when used in conjunction with the --no-daemonize option. (This is a Puppet setting, and can go in puppet.conf. Note the special ´no-´ prefix for boolean settings on the command line.)
--serverport: The port on which to contact the Puppet Server. (This is a Puppet setting, and can go in puppet.conf.)
--sourceaddress: Set the source IP address for transactions. This defaults to automatically selected. (This is a Puppet setting, and can go in puppet.conf.)
--test: Enable the most common options used for testing. These are ´onetime´, ´verbose´, ´no-daemonize´, ´no-usecacheonfailure´, ´detailed-exitcodes´, ´no-splay´, and ´show_diff´.
--trace Prints stack traces on some errors. (This is a Puppet setting, and can go in puppet.conf. Note the special ´no-´ prefix for boolean settings on the command line.)
--verbose: Turn on verbose reporting.
--version: Print the puppet version number and exit.
--waitforcert: This option only matters for daemons that do not yet have certificates and it is enabled by default, with a value of 120 (seconds). This causes ´puppet agent´ to connect to the server every 2 minutes and ask it to sign a certificate request. This is useful for the initial setup of a puppet client. You can turn off waiting for certificates by specifying a time of 0. (This is a Puppet setting, and can go in puppet.conf.)
--write_catalog_summary After compiling the catalog saves the resource list and classes list to the node in the state directory named classes.txt and resources.txt (This is a Puppet setting, and can go in puppet.conf.)

EXAMPLE

$ puppet agent --server puppet.domain.com

DIAGNOSTICS

Puppet agent accepts the following signals:

SIGHUP: Restart the puppet agent daemon.
SIGINT and SIGTERM: Shut down the puppet agent daemon.
SIGUSR1: Immediately retrieve and apply configurations from the puppet master.
SIGUSR2: Close file descriptors for log files and reopen them. Used with logrotate.

AUTHOR

Luke Kanies