lldptool(8) | Linux | lldptool(8) |
LLDP-MED - Show / manipulate MED TLV configurations
lldptool -t -i ethx -V [ TLV_TYPE ] enableTx
lldptool -T -i ethx -V [ TLV_TYPE ] enableTx = { yes | no }
lldptool -T -i ethx -V LLDP-MED devtype = { class1 | class2 | class3 | none }
lldptool -t -i ethx -V LLDP-MED devtype
TLV_TYPE : = {LLDP-MED | medCap | medPolicy | medLoc | medPower | medHwRev | medFwRev | medSwRev | medSerNum | medManuf | medModel | medAssetID }
The LLDP-MED extensions support the Link Layer Discovery Protocol for Media Endpoint Devices defined in the ANSI/TIA-1057-2006 document. Each TLV can be configured as a class1 , class2 or class3 device. Class I devices are the most basic class of Endpoint Device, Class II devices support media stream capabilities and Class III devices directly support end users of the IP communication system. See ANS-TIA-1057 for clarification of class types.
List of supported TLV specifiers applicable to Media Endpoint Devices.
lldptool(8), lldpad(8)
John Fastabend
June 2011 | open-lldp |