unistd.h(7POSIX) POSIX Programmer's Manual unistd.h(7POSIX)

This manual page is part of the POSIX Programmer's Manual. The Linux implementation of this interface may differ (consult the corresponding Linux manual page for details of Linux behavior), or the interface may not be implemented on Linux.

unistd.h — standard symbolic constants and types

#include <unistd.h>

The <unistd.h> header defines miscellaneous symbolic constants and types, and declares miscellaneous functions. The actual values of the constants are unspecified except as shown. The contents of this header are shown below.

Version Test Macros

The <unistd.h> header shall define the following symbolic constants. The values shall be suitable for use in #if preprocessing directives.

_POSIX_VERSION

Integer value indicating version of this standard (C-language binding) to which the implementation conforms. For implementations conforming to POSIX.1‐2008, the value shall be 200809L.
_POSIX2_VERSION

Integer value indicating version of the Shell and Utilities volume of POSIX.1 to which the implementation conforms. For implementations conforming to POSIX.1‐2008, the value shall be 200809L. For profile implementations that define _POSIX_SUBPROFILE (see Section 2.1.5.1, Subprofiling Considerations) in <unistd.h>, _POSIX2_VERSION may be left undefined or be defined with the value -1 to indicate that the Shell and Utilities volume of POSIX.1 is not supported. In this case, a call to sysconf(_SC_2_VERSION) shall return either 200809L or -1 indicating that the Shell and Utilities volume of POSIX.1 is or is not, respectively, supported at runtime.

The <unistd.h> header shall define the following symbolic constant only if the implementation supports the XSI option; see Section 2.1.4, XSI Conformance. If defined, its value shall be suitable for use in #if preprocessing directives.

_XOPEN_VERSION

Integer value indicating version of the X/Open Portability Guide to which the implementation conforms. The value shall be 700.

The following symbolic constants, if defined in <unistd.h>, shall have a value of -1, 0, or greater, unless otherwise specified below. For profile implementations that define _POSIX_SUBPROFILE (see Section 2.1.5.1, Subprofiling Considerations) in <unistd.h>, constants described below as always having a value greater than zero need not be defined and, if defined, may have a value of -1, 0, or greater. The values shall be suitable for use in #if preprocessing directives.

If a symbolic constant is not defined or is defined with the value -1, the option is not supported for compilation. If it is defined with a value greater than zero, the option shall always be supported when the application is executed. If it is defined with the value zero, the option shall be supported for compilation and might or might not be supported at runtime. See Section 2.1.6, Options for further information about the conformance requirements of these three categories of support.

_POSIX_ADVISORY_INFO

The implementation supports the Advisory Information option. If this symbol is defined in <unistd.h>, it shall be defined to be -1, 0, or 200809L. The value of this symbol reported by sysconf() shall either be -1 or 200809L.
_POSIX_ASYNCHRONOUS_IO

The implementation supports asynchronous input and output. This symbol shall always be set to the value 200809L.
_POSIX_BARRIERS

The implementation supports barriers. This symbol shall always be set to the value 200809L.
_POSIX_CHOWN_RESTRICTED

The use of chown() and fchown() is restricted to a process with appropriate privileges, and to changing the group ID of a file only to the effective group ID of the process or to one of its supplementary group IDs. This symbol shall be defined with a value other than -1.
_POSIX_CLOCK_SELECTION

The implementation supports clock selection. This symbol shall always be set to the value 200809L.
_POSIX_CPUTIME

The implementation supports the Process CPU-Time Clocks option. If this symbol is defined in <unistd.h>, it shall be defined to be -1, 0, or 200809L. The value of this symbol reported by sysconf() shall either be -1 or 200809L.
_POSIX_FSYNC

The implementation supports the File Synchronization option. If this symbol is defined in <unistd.h>, it shall be defined to be -1, 0, or 200809L. The value of this symbol reported by sysconf() shall either be -1 or 200809L.
_POSIX_IPV6

The implementation supports the IPv6 option. If this symbol is defined in <unistd.h>, it shall be defined to be -1, 0, or 200809L. The value of this symbol reported by sysconf() shall either be -1 or 200809L.
_POSIX_JOB_CONTROL

The implementation supports job control. This symbol shall always be set to a value greater than zero.
_POSIX_MAPPED_FILES

The implementation supports memory mapped Files. This symbol shall always be set to the value 200809L.
_POSIX_MEMLOCK

The implementation supports the Process Memory Locking option. If this symbol is defined in <unistd.h>, it shall be defined to be -1, 0, or 200809L. The value of this symbol reported by sysconf() shall either be -1 or 200809L.
_POSIX_MEMLOCK_RANGE

The implementation supports the Range Memory Locking option. If this symbol is defined in <unistd.h>, it shall be defined to be -1, 0, or 200809L. The value of this symbol reported by sysconf() shall either be -1 or 200809L.
_POSIX_MEMORY_PROTECTION

The implementation supports memory protection. This symbol shall always be set to the value 200809L.
_POSIX_MESSAGE_PASSING

The implementation supports the Message Passing option. If this symbol is defined in <unistd.h>, it shall be defined to be -1, 0, or 200809L. The value of this symbol reported by sysconf() shall either be -1 or 200809L.
_POSIX_MONOTONIC_CLOCK

The implementation supports the Monotonic Clock option. If this symbol is defined in <unistd.h>, it shall be defined to be -1, 0, or 200809L. The value of this symbol reported by sysconf() shall either be -1 or 200809L.
_POSIX_NO_TRUNC

Pathname components longer than {NAME_MAX} generate an error. This symbol shall be defined with a value other than -1.
_POSIX_PRIORITIZED_IO

The implementation supports the Prioritized Input and Output option. If this symbol is defined in <unistd.h>, it shall be defined to be -1, 0, or 200809L. The value of this symbol reported by sysconf() shall either be -1 or 200809L.
_POSIX_PRIORITY_SCHEDULING

The implementation supports the Process Scheduling option. If this symbol is defined in <unistd.h>, it shall be defined to be -1, 0, or 200809L. The value of this symbol reported by sysconf() shall either be -1 or 200809L.
_POSIX_RAW_SOCKETS

The implementation supports the Raw Sockets option. If this symbol is defined in <unistd.h>, it shall be defined to be -1, 0, or 200809L. The value of this symbol reported by sysconf() shall either be -1 or 200809L.
_POSIX_READER_WRITER_LOCKS

The implementation supports read-write locks. This symbol shall always be set to the value 200809L.
_POSIX_REALTIME_SIGNALS

The implementation supports realtime signals. This symbol shall always be set to the value 200809L.
_POSIX_REGEXP

The implementation supports the Regular Expression Handling option. This symbol shall always be set to a value greater than zero.
_POSIX_SAVED_IDS

Each process has a saved set-user-ID and a saved set-group-ID. This symbol shall always be set to a value greater than zero.
_POSIX_SEMAPHORES

The implementation supports semaphores. This symbol shall always be set to the value 200809L.
_POSIX_SHARED_MEMORY_OBJECTS

The implementation supports the Shared Memory Objects option. If this symbol is defined in <unistd.h>, it shall be defined to be -1, 0, or 200809L. The value of this symbol reported by sysconf() shall either be -1 or 200809L.
_POSIX_SHELL

The implementation supports the POSIX shell. This symbol shall always be set to a value greater than zero.
_POSIX_SPAWN

The implementation supports the Spawn option. If this symbol is defined in <unistd.h>, it shall be defined to be -1, 0, or 200809L. The value of this symbol reported by sysconf() shall either be -1 or 200809L.
_POSIX_SPIN_LOCKS

The implementation supports spin locks. This symbol shall always be set to the value 200809L.
_POSIX_SPORADIC_SERVER

The implementation supports the Process Sporadic Server option. If this symbol is defined in <unistd.h>, it shall be defined to be -1, 0, or 200809L. The value of this symbol reported by sysconf() shall either be -1 or 200809L.
_POSIX_SYNCHRONIZED_IO

The implementation supports the Synchronized Input and Output option. If this symbol is defined in <unistd.h>, it shall be defined to be -1, 0, or 200809L. The value of this symbol reported by sysconf() shall either be -1 or 200809L.
_POSIX_THREAD_ATTR_STACKADDR

The implementation supports the Thread Stack Address Attribute option. If this symbol is defined in <unistd.h>, it shall be defined to be -1, 0, or 200809L. The value of this symbol reported by sysconf() shall either be -1 or 200809L.
_POSIX_THREAD_ATTR_STACKSIZE

The implementation supports the Thread Stack Size Attribute option. If this symbol is defined in <unistd.h>, it shall be defined to be -1, 0, or 200809L. The value of this symbol reported by sysconf() shall either be -1 or 200809L.
_POSIX_THREAD_CPUTIME

The implementation supports the Thread CPU-Time Clocks option. If this symbol is defined in <unistd.h>, it shall be defined to be -1, 0, or 200809L. The value of this symbol reported by sysconf() shall either be -1 or 200809L.
_POSIX_THREAD_PRIO_INHERIT

The implementation supports the Non-Robust Mutex Priority Inheritance option. If this symbol is defined in <unistd.h>, it shall be defined to be -1, 0, or 200809L. The value of this symbol reported by sysconf() shall either be -1 or 200809L.
_POSIX_THREAD_PRIO_PROTECT

The implementation supports the Non-Robust Mutex Priority Protection option. If this symbol is defined in <unistd.h>, it shall be defined to be -1, 0, or 200809L. The value of this symbol reported by sysconf() shall either be -1 or 200809L.
_POSIX_THREAD_PRIORITY_SCHEDULING

The implementation supports the Thread Execution Scheduling option. If this symbol is defined in <unistd.h>, it shall be defined to be -1, 0, or 200809L. The value of this symbol reported by sysconf() shall either be -1 or 200809L.
_POSIX_THREAD_PROCESS_SHARED

The implementation supports the Thread Process-Shared Synchronization option. If this symbol is defined in <unistd.h>, it shall be defined to be -1, 0, or 200809L. The value of this symbol reported by sysconf() shall either be -1 or 200809L.
_POSIX_THREAD_ROBUST_PRIO_INHERIT

The implementation supports the Robust Mutex Priority Inheritance option. If this symbol is defined in <unistd.h>, it shall be defined to be -1, 0, or 200809L. The value of this symbol reported by sysconf() shall either be -1 or 200809L.
_POSIX_THREAD_ROBUST_PRIO_PROTECT

The implementation supports the Robust Mutex Priority Protection option. If this symbol is defined in <unistd.h>, it shall be defined to be -1, 0, or 200809L. The value of this symbol reported by sysconf() shall either be -1 or 200809L.
_POSIX_THREAD_SAFE_FUNCTIONS

The implementation supports thread-safe functions. This symbol shall always be set to the value 200809L.
_POSIX_THREAD_SPORADIC_SERVER

The implementation supports the Thread Sporadic Server option. If this symbol is defined in <unistd.h>, it shall be defined to be -1, 0, or 200809L. The value of this symbol reported by sysconf() shall either be -1 or 200809L.
_POSIX_THREADS

The implementation supports threads. This symbol shall always be set to the value 200809L.
_POSIX_TIMEOUTS

The implementation supports timeouts. This symbol shall always be set to the value 200809L.
_POSIX_TIMERS

The implementation supports timers. This symbol shall always be set to the value 200809L.
_POSIX_TRACE

The implementation supports the Trace option. If this symbol is defined in <unistd.h>, it shall be defined to be -1, 0, or 200809L. The value of this symbol reported by sysconf() shall either be -1 or 200809L.
_POSIX_TRACE_EVENT_FILTER

The implementation supports the Trace Event Filter option. If this symbol is defined in <unistd.h>, it shall be defined to be -1, 0, or 200809L. The value of this symbol reported by sysconf() shall either be -1 or 200809L.
_POSIX_TRACE_INHERIT

The implementation supports the Trace Inherit option. If this symbol is defined in <unistd.h>, it shall be defined to be -1, 0, or 200809L. The value of this symbol reported by sysconf() shall either be -1 or 200809L.
_POSIX_TRACE_LOG

The implementation supports the Trace Log option. If this symbol is defined in <unistd.h>, it shall be defined to be -1, 0, or 200809L. The value of this symbol reported by sysconf() shall either be -1 or 200809L.
_POSIX_TYPED_MEMORY_OBJECTS

The implementation supports the Typed Memory Objects option. If this symbol is defined in <unistd.h>, it shall be defined to be -1, 0, or 200809L. The value of this symbol reported by sysconf() shall either be -1 or 200809L.
_POSIX_V6_ILP32_OFF32

The implementation provides a C-language compilation environment with 32-bit int, long, pointer, and off_t types.
_POSIX_V6_ILP32_OFFBIG

The implementation provides a C-language compilation environment with 32-bit int, long, and pointer types and an off_t type using at least 64 bits.
_POSIX_V6_LP64_OFF64

The implementation provides a C-language compilation environment with 32-bit int and 64-bit long, pointer, and off_t types.
_POSIX_V6_LPBIG_OFFBIG

The implementation provides a C-language compilation environment with an int type using at least 32 bits and long, pointer, and off_t types using at least 64 bits.
_POSIX_V7_ILP32_OFF32

The implementation provides a C-language compilation environment with 32-bit int, long, pointer, and off_t types.
_POSIX_V7_ILP32_OFFBIG

The implementation provides a C-language compilation environment with 32-bit int, long, and pointer types and an off_t type using at least 64 bits.
_POSIX_V7_LP64_OFF64

The implementation provides a C-language compilation environment with 32-bit int and 64-bit long, pointer, and off_t types.
_POSIX_V7_LPBIG_OFFBIG

The implementation provides a C-language compilation environment with an int type using at least 32 bits and long, pointer, and off_t types using at least 64 bits.
_POSIX2_C_BIND

The implementation supports the C-Language Binding option. This symbol shall always have the value 200809L.
_POSIX2_C_DEV

The implementation supports the C-Language Development Utilities option. If this symbol is defined in <unistd.h>, it shall be defined to be -1, 0, or 200809L. The value of this symbol reported by sysconf() shall either be -1 or 200809L.
_POSIX2_CHAR_TERM

The implementation supports the Terminal Characteristics option. The value of this symbol reported by sysconf() shall either be -1 or a value greater than zero.
_POSIX2_FORT_DEV

The implementation supports the FORTRAN Development Utilities option. If this symbol is defined in <unistd.h>, it shall be defined to be -1, 0, or 200809L. The value of this symbol reported by sysconf() shall either be -1 or 200809L.
_POSIX2_FORT_RUN

The implementation supports the FORTRAN Runtime Utilities option. If this symbol is defined in <unistd.h>, it shall be defined to be -1, 0, or 200809L. The value of this symbol reported by sysconf() shall either be -1 or 200809L.
_POSIX2_LOCALEDEF

The implementation supports the creation of locales by the localedef utility. If this symbol is defined in <unistd.h>, it shall be defined to be -1, 0, or 200809L. The value of this symbol reported by sysconf() shall either be -1 or 200809L.
_POSIX2_PBS

The implementation supports the Batch Environment Services and Utilities option. If this symbol is defined in <unistd.h>, it shall be defined to be -1, 0, or 200809L. The value of this symbol reported by sysconf() shall either be -1 or 200809L.
_POSIX2_PBS_ACCOUNTING

The implementation supports the Batch Accounting option. If this symbol is defined in <unistd.h>, it shall be defined to be -1, 0, or 200809L. The value of this symbol reported by sysconf() shall either be -1 or 200809L.
_POSIX2_PBS_CHECKPOINT

The implementation supports the Batch Checkpoint/Restart option. If this symbol is defined in <unistd.h>, it shall be defined to be -1, 0, or 200809L. The value of this symbol reported by sysconf() shall either be -1 or 200809L.
_POSIX2_PBS_LOCATE

The implementation supports the Locate Batch Job Request option. If this symbol is defined in <unistd.h>, it shall be defined to be -1, 0, or 200809L. The value of this symbol reported by sysconf() shall either be -1 or 200809L.
_POSIX2_PBS_MESSAGE

The implementation supports the Batch Job Message Request option. If this symbol is defined in <unistd.h>, it shall be defined to be -1, 0, or 200809L. The value of this symbol reported by sysconf() shall either be -1 or 200809L.
_POSIX2_PBS_TRACK

The implementation supports the Track Batch Job Request option. If this symbol is defined in <unistd.h>, it shall be defined to be -1, 0, or 200809L. The value of this symbol reported by sysconf() shall either be -1 or 200809L.
_POSIX2_SW_DEV

The implementation supports the Software Development Utilities option. If this symbol is defined in <unistd.h>, it shall be defined to be -1, 0, or 200809L. The value of this symbol reported by sysconf() shall either be -1 or 200809L.
_POSIX2_UPE

The implementation supports the User Portability Utilities option. If this symbol is defined in <unistd.h>, it shall be defined to be -1, 0, or 200809L. The value of this symbol reported by sysconf() shall either be -1 or 200809L.
_XOPEN_CRYPT

The implementation supports the X/Open Encryption Option Group.
_XOPEN_ENH_I18N

The implementation supports the Issue 4, Version 2 Enhanced Internationalization Option Group. This symbol shall always be set to a value other than -1.
_XOPEN_REALTIME

The implementation supports the X/Open Realtime Option Group.
_XOPEN_REALTIME_THREADS

The implementation supports the X/Open Realtime Threads Option Group.
_XOPEN_SHM

The implementation supports the Issue 4, Version 2 Shared Memory Option Group. This symbol shall always be set to a value other than -1.
_XOPEN_STREAMS

The implementation supports the XSI STREAMS Option Group.
_XOPEN_UNIX

The implementation supports the XSI option.
_XOPEN_UUCP

The implementation supports the UUCP Utilities option. If this symbol is defined in <unistd.h>, it shall be defined to be -1, 0, or 200809L. The value of this symbol reported by sysconf() shall be either -1 or 200809L.

If any of the following symbolic constants are not defined in the <unistd.h> header, the value shall vary depending on the file to which it is applied. If defined, they shall have values suitable for use in #if preprocessing directives.

If any of the following symbolic constants are defined to have value -1 in the <unistd.h> header, the implementation shall not provide the option on any file; if any are defined to have a value other than -1 in the <unistd.h> header, the implementation shall provide the option on all applicable files.

All of the following values, whether defined as symbolic constants in <unistd.h> or not, may be queried with respect to a specific file using the pathconf() or fpathconf() functions:

_POSIX_ASYNC_IO

Asynchronous input or output operations may be performed for the associated file.
_POSIX_PRIO_IO

Prioritized input or output operations may be performed for the associated file.
_POSIX_SYNC_IO

Synchronized input or output operations may be performed for the associated file.

If the following symbolic constants are defined in the <unistd.h> header, they apply to files and all paths in all file systems on the implementation:

_POSIX_TIMESTAMP_RESOLUTION

The resolution in nanoseconds for all file timestamps.
_POSIX2_SYMLINKS

Symbolic links can be created.

The <unistd.h> header shall define NULL as described in <stddef.h>.

The <unistd.h> header shall define the following symbolic constants for use with the access() function. The values shall be suitable for use in #if preprocessing directives.

Test for existence of file.
Test for read permission.
Test for write permission.
Test for execute (search) permission.

The constants F_OK, R_OK, W_OK, and X_OK and the expressions R_OK|W_OK, R_OK|X_OK, and R_OK|W_OK|X_OK shall all have distinct values.

The <unistd.h> header shall define the following symbolic constants for the confstr() function:

_CS_PATH

This is the value for the PATH environment variable that finds all of the standard utilities that are provided in a manner accessible via the exec family of functions.
_CS_POSIX_V7_ILP32_OFF32_CFLAGS

If sysconf(_SC_V7_ILP32_OFF32) returns -1, the meaning of this value is unspecified. Otherwise, this value is the set of initial options to be given to the c99 utility to build an application using a programming model with 32-bit int, long, pointer, and off_t types.
_CS_POSIX_V7_ILP32_OFF32_LDFLAGS

If sysconf(_SC_V7_ILP32_OFF32) returns -1, the meaning of this value is unspecified. Otherwise, this value is the set of final options to be given to the c99 utility to build an application using a programming model with 32-bit int, long, pointer, and off_t types.
_CS_POSIX_V7_ILP32_OFF32_LIBS

If sysconf(_SC_V7_ILP32_OFF32) returns -1, the meaning of this value is unspecified. Otherwise, this value is the set of libraries to be given to the c99 utility to build an application using a programming model with 32-bit int, long, pointer, and off_t types.
_CS_POSIX_V7_ILP32_OFFBIG_CFLAGS

If sysconf(_SC_V7_ILP32_OFFBIG) returns -1, the meaning of this value is unspecified. Otherwise, this value is the set of initial options to be given to the c99 utility to build an application using a programming model with 32-bit int, long, and pointer types, and an off_t type using at least 64 bits.
_CS_POSIX_V7_ILP32_OFFBIG_LDFLAGS

If sysconf(_SC_V7_ILP32_OFFBIG) returns -1, the meaning of this value is unspecified. Otherwise, this value is the set of final options to be given to the c99 utility to build an application using a programming model with 32-bit int, long, and pointer types, and an off_t type using at least 64 bits.
_CS_POSIX_V7_ILP32_OFFBIG_LIBS

If sysconf(_SC_V7_ILP32_OFFBIG) returns -1, the meaning of this value is unspecified. Otherwise, this value is the set of libraries to be given to the c99 utility to build an application using a programming model with 32-bit int, long, and pointer types, and an off_t type using at least 64 bits.
_CS_POSIX_V7_LP64_OFF64_CFLAGS

If sysconf(_SC_V7_LP64_OFF64) returns -1, the meaning of this value is unspecified. Otherwise, this value is the set of initial options to be given to the c99 utility to build an application using a programming model with 32-bit int and 64-bit long, pointer, and off_t types.
_CS_POSIX_V7_LP64_OFF64_LDFLAGS

If sysconf(_SC_V7_LP64_OFF64) returns -1, the meaning of this value is unspecified. Otherwise, this value is the set of final options to be given to the c99 utility to build an application using a programming model with 32-bit int and 64-bit long, pointer, and off_t types.
_CS_POSIX_V7_LP64_OFF64_LIBS

If sysconf(_SC_V7_LP64_OFF64) returns -1, the meaning of this value is unspecified. Otherwise, this value is the set of libraries to be given to the c99 utility to build an application using a programming model with 32-bit int and 64-bit long, pointer, and off_t types.
_CS_POSIX_V7_LPBIG_OFFBIG_CFLAGS

If sysconf(_SC_V7_LPBIG_OFFBIG) returns -1, the meaning of this value is unspecified. Otherwise, this value is the set of initial options to be given to the c99 utility to build an application using a programming model with an int type using at least 32 bits and long, pointer, and off_t types using at least 64 bits.
_CS_POSIX_V7_LPBIG_OFFBIG_LDFLAGS

If sysconf(_SC_V7_LPBIG_OFFBIG) returns -1, the meaning of this value is unspecified. Otherwise, this value is the set of final options to be given to the c99 utility to build an application using a programming model with an int type using at least 32 bits and long, pointer, and off_t types using at least 64 bits.
_CS_POSIX_V7_LPBIG_OFFBIG_LIBS

If sysconf(_SC_V7_LPBIG_OFFBIG) returns -1, the meaning of this value is unspecified. Otherwise, this value is the set of libraries to be given to the c99 utility to build an application using a programming model with an int type using at least 32 bits and long, pointer, and off_t types using at least 64 bits.
_CS_POSIX_V7_THREADS_CFLAGS

If sysconf(_SC_POSIX_THREADS) returns -1, the meaning of this value is unspecified. Otherwise, this value is the set of initial options to be given to the c99 utility to build a multi-threaded application. These flags are in addition to those associated with any of the other _CS_POSIX_V7_*_CFLAGS values used to specify particular type size programing environments.
_CS_POSIX_V7_THREADS_LDFLAGS

If sysconf(_SC_POSIX_THREADS) returns -1, the meaning of this value is unspecified. Otherwise, this value is the set of final options to be given to the c99 utility to build a multi-threaded application. These flags are in addition to those associated with any of the other _CS_POSIX_V7_*_LDFLAGS values used to specify particular type size programing environments.
_CS_POSIX_V7_WIDTH_RESTRICTED_ENVS

This value is a <newline>-separated list of names of programming environments supported by the implementation in which the widths of the blksize_t, cc_t, mode_t, nfds_t, pid_t, ptrdiff_t, size_t, speed_t, ssize_t, suseconds_t, tcflag_t, wchar_t, and wint_t types are no greater than the width of type long. The format of each name shall be suitable for use with the getconf -v option.
_CS_V7_ENV

This is the value that provides the environment variable information (other than that provided by _CS_PATH) that is required by the implementation to create a conforming environment, as described in the implementation's conformance documentation.

The following symbolic constants are reserved for compatibility with Issue 6:

_CS_POSIX_V6_ILP32_OFF32_CFLAGS
_CS_POSIX_V6_ILP32_OFF32_LDFLAGS
_CS_POSIX_V6_ILP32_OFF32_LIBS
_CS_POSIX_V6_ILP32_OFFBIG_CFLAGS
_CS_POSIX_V6_ILP32_OFFBIG_LDFLAGS
_CS_POSIX_V6_ILP32_OFFBIG_LIBS
_CS_POSIX_V6_LP64_OFF64_CFLAGS
_CS_POSIX_V6_LP64_OFF64_LDFLAGS
_CS_POSIX_V6_LP64_OFF64_LIBS
_CS_POSIX_V6_LPBIG_OFFBIG_CFLAGS
_CS_POSIX_V6_LPBIG_OFFBIG_LDFLAGS
_CS_POSIX_V6_LPBIG_OFFBIG_LIBS
_CS_POSIX_V6_WIDTH_RESTRICTED_ENVS
_CS_V6_ENV

The <unistd.h> header shall define SEEK_CUR, SEEK_END, and SEEK_SET as described in <stdio.h>.

The <unistd.h> header shall define the following symbolic constants as possible values for the function argument to the lockf() function:

Lock a section for exclusive use.
Test section for locks by other processes.
Test and lock a section for exclusive use.
Unlock locked sections.

The <unistd.h> header shall define the following symbolic constants for pathconf():

_PC_2_SYMLINKS
_PC_ALLOC_SIZE_MIN
_PC_ASYNC_IO
_PC_CHOWN_RESTRICTED
_PC_FILESIZEBITS
_PC_LINK_MAX
_PC_MAX_CANON
_PC_MAX_INPUT
_PC_NAME_MAX
_PC_NO_TRUNC
_PC_PATH_MAX
_PC_PIPE_BUF
_PC_PRIO_IO
_PC_REC_INCR_XFER_SIZE
_PC_REC_MAX_XFER_SIZE
_PC_REC_MIN_XFER_SIZE
_PC_REC_XFER_ALIGN
_PC_SYMLINK_MAX
_PC_SYNC_IO
_PC_TIMESTAMP_RESOLUTION
_PC_VDISABLE

The <unistd.h> header shall define the following symbolic constants for sysconf():

_SC_2_C_BIND
_SC_2_C_DEV
_SC_2_CHAR_TERM
_SC_2_FORT_DEV
_SC_2_FORT_RUN
_SC_2_LOCALEDEF
_SC_2_PBS
_SC_2_PBS_ACCOUNTING
_SC_2_PBS_CHECKPOINT
_SC_2_PBS_LOCATE
_SC_2_PBS_MESSAGE
_SC_2_PBS_TRACK
_SC_2_SW_DEV
_SC_2_UPE
_SC_2_VERSION
_SC_ADVISORY_INFO
_SC_AIO_LISTIO_MAX
_SC_AIO_MAX
_SC_AIO_PRIO_DELTA_MAX
_SC_ARG_MAX
_SC_ASYNCHRONOUS_IO
_SC_ATEXIT_MAX
_SC_BARRIERS
_SC_BC_BASE_MAX
_SC_BC_DIM_MAX
_SC_BC_SCALE_MAX
_SC_BC_STRING_MAX
_SC_CHILD_MAX
_SC_CLK_TCK
_SC_CLOCK_SELECTION
_SC_COLL_WEIGHTS_MAX
_SC_CPUTIME
_SC_DELAYTIMER_MAX
_SC_EXPR_NEST_MAX
_SC_FSYNC
_SC_GETGR_R_SIZE_MAX
_SC_GETPW_R_SIZE_MAX
_SC_HOST_NAME_MAX
_SC_IOV_MAX
_SC_IPV6
_SC_JOB_CONTROL
_SC_LINE_MAX
_SC_LOGIN_NAME_MAX
_SC_MAPPED_FILES
_SC_MEMLOCK
_SC_MEMLOCK_RANGE
_SC_MEMORY_PROTECTION
_SC_MESSAGE_PASSING
_SC_MONOTONIC_CLOCK
_SC_MQ_OPEN_MAX
_SC_MQ_PRIO_MAX
_SC_NGROUPS_MAX
_SC_OPEN_MAX
_SC_PAGE_SIZE
_SC_PAGESIZE
_SC_PRIORITIZED_IO
_SC_PRIORITY_SCHEDULING
_SC_RAW_SOCKETS
_SC_RE_DUP_MAX
_SC_READER_WRITER_LOCKS
_SC_REALTIME_SIGNALS
_SC_REGEXP
_SC_RTSIG_MAX
_SC_SAVED_IDS
_SC_SEM_NSEMS_MAX
_SC_SEM_VALUE_MAX
_SC_SEMAPHORES
_SC_SHARED_MEMORY_OBJECTS
_SC_SHELL
_SC_SIGQUEUE_MAX
_SC_SPAWN
_SC_SPIN_LOCKS
_SC_SPORADIC_SERVER
_SC_SS_REPL_MAX
_SC_STREAM_MAX
_SC_SYMLOOP_MAX
_SC_SYNCHRONIZED_IO
_SC_THREAD_ATTR_STACKADDR
_SC_THREAD_ATTR_STACKSIZE
_SC_THREAD_CPUTIME
_SC_THREAD_DESTRUCTOR_ITERATIONS
_SC_THREAD_KEYS_MAX
_SC_THREAD_PRIO_INHERIT
_SC_THREAD_PRIO_PROTECT
_SC_THREAD_PRIORITY_SCHEDULING
_SC_THREAD_PROCESS_SHARED
_SC_THREAD_ROBUST_PRIO_INHERIT
_SC_THREAD_ROBUST_PRIO_PROTECT
_SC_THREAD_SAFE_FUNCTIONS
_SC_THREAD_SPORADIC_SERVER
_SC_THREAD_STACK_MIN
_SC_THREAD_THREADS_MAX
_SC_THREADS
_SC_TIMEOUTS
_SC_TIMER_MAX
_SC_TIMERS
_SC_TRACE
_SC_TRACE_EVENT_FILTER
_SC_TRACE_EVENT_NAME_MAX
_SC_TRACE_INHERIT
_SC_TRACE_LOG
_SC_TRACE_NAME_MAX
_SC_TRACE_SYS_MAX
_SC_TRACE_USER_EVENT_MAX
_SC_TTY_NAME_MAX
_SC_TYPED_MEMORY_OBJECTS
_SC_TZNAME_MAX
_SC_V7_ILP32_OFF32
_SC_V7_ILP32_OFFBIG
_SC_V7_LP64_OFF64
_SC_V7_LPBIG_OFFBIG
_SC_V6_ILP32_OFF32
_SC_V6_ILP32_OFFBIG
_SC_V6_LP64_OFF64
_SC_V6_LPBIG_OFFBIG
_SC_VERSION
_SC_XOPEN_CRYPT
_SC_XOPEN_ENH_I18N
_SC_XOPEN_REALTIME
_SC_XOPEN_REALTIME_THREADS
_SC_XOPEN_SHM
_SC_XOPEN_STREAMS
_SC_XOPEN_UNIX
_SC_XOPEN_UUCP
_SC_XOPEN_VERSION

The two constants _SC_PAGESIZE and _SC_PAGE_SIZE may be defined to have the same value.

The <unistd.h> header shall define the following symbolic constants for file streams:

File number of stderr; 2.
File number of stdin; 0.
File number of stdout; 1.

The <unistd.h> header shall define the following symbolic constant for terminal special character handling:

_POSIX_VDISABLE
This symbol shall be defined to be the value of a character that shall disable terminal special character handling as described in Section 11.2.6, Special Control Characters. This symbol shall always be set to a value other than -1.

The <unistd.h> header shall define the size_t, ssize_t, uid_t, gid_t, off_t, and pid_t types as described in <sys/types.h>.

The <unistd.h> header shall define the intptr_t type as described in <stdint.h>.

The following shall be declared as functions and may also be defined as macros. Function prototypes shall be provided.

int          access(const char *, int);
unsigned     alarm(unsigned);
int          chdir(const char *);
int          chown(const char *, uid_t, gid_t);
int          close(int);
size_t       confstr(int, char *, size_t);
char        *crypt(const char *, const char *);
int          dup(int);


int          dup2(int, int);
void         _exit(int);
void         encrypt(char [64], int);
int          execl(const char *, const char *, ...);
int          execle(const char *, const char *, ...);
int          execlp(const char *, const char *, ...);
int          execv(const char *, char *const []);
int          execve(const char *, char *const [], char *const []);
int          execvp(const char *, char *const []);
int          faccessat(int, const char *, int, int);
int          fchdir(int);
int          fchown(int, uid_t, gid_t);
int          fchownat(int, const char *, uid_t, gid_t, int);
int          fdatasync(int);
int          fexecve(int, char *const [], char *const []);
pid_t        fork(void);
long         fpathconf(int, int);
int          fsync(int);
int          ftruncate(int, off_t);
char        *getcwd(char *, size_t);
gid_t        getegid(void);
uid_t        geteuid(void);
gid_t        getgid(void);
int          getgroups(int, gid_t []);
long         gethostid(void);
int          gethostname(char *, size_t);
char        *getlogin(void);
int          getlogin_r(char *, size_t);
int          getopt(int, char * const [], const char *);
pid_t        getpgid(pid_t);
pid_t        getpgrp(void);
pid_t        getpid(void);
pid_t        getppid(void);
pid_t        getsid(pid_t);
uid_t        getuid(void);
int          isatty(int);
int          lchown(const char *, uid_t, gid_t);
int          link(const char *, const char *);
int          linkat(int, const char *, int, const char *, int);
int          lockf(int, int, off_t);
off_t        lseek(int, off_t, int);
int          nice(int);
long         pathconf(const char *, int);
int          pause(void);
int          pipe(int [2]);
ssize_t      pread(int, void *, size_t, off_t);
ssize_t      pwrite(int, const void *, size_t, off_t);
ssize_t      read(int, void *, size_t);
ssize_t      readlink(const char *restrict, char *restrict, size_t);
ssize_t      readlinkat(int, const char *restrict, char *restrict, size_t);
int          rmdir(const char *);
int          setegid(gid_t);
int          seteuid(uid_t);
int          setgid(gid_t);


int          setpgid(pid_t, pid_t);
pid_t        setpgrp(void);
int          setregid(gid_t, gid_t);
int          setreuid(uid_t, uid_t);
pid_t        setsid(void);
int          setuid(uid_t);
unsigned     sleep(unsigned);
void         swab(const void *restrict, void *restrict, ssize_t);
int          symlink(const char *, const char *);
int          symlinkat(const char *, int, const char *);
void         sync(void);
long         sysconf(int);
pid_t        tcgetpgrp(int);
int          tcsetpgrp(int, pid_t);
int          truncate(const char *, off_t);
char        *ttyname(int);
int          ttyname_r(int, char *, size_t);
int          unlink(const char *);
int          unlinkat(int, const char *, int);
ssize_t      write(int, const void *, size_t);

Implementations may also include the pthread_atfork() prototype as defined in <pthread.h>. Implementations may also include the ctermid() prototype as defined in <stdio.h>.

The <unistd.h> header shall declare the following external variables:

extern char  *optarg;
extern int    opterr, optind, optopt;

Inclusion of the <unistd.h> header may make visible all symbols from the headers <stddef.h>, <stdint.h>, and <stdio.h>.

The following sections are informative.

POSIX.1‐2008 only describes the behavior of systems that claim conformance to it. However, application developers who want to write applications that adapt to other versions of this standard (or to systems that do not conform to any POSIX standard) may find it useful to code them so as to conditionally compile different code depending on the value of _POSIX_VERSION, for example:

#if _POSIX_VERSION >= 200112L
/* Use the newer function that copes with large files. */
off_t pos=ftello(fp);
#else
/* Either this is an old version of POSIX, or _POSIX_VERSION is
   not even defined, so use the traditional function. */
long pos=ftell(fp);
#endif

Earlier versions of POSIX.1‐2008 and of the Single UNIX Specification can be identified by the following macros:


_POSIX_VERSION==198808L

_POSIX_VERSION==199009L

_POSIX_VERSION==199506L

_XOPEN_UNIX and _XOPEN_VERSION==4

_XOPEN_UNIX and _XOPEN_VERSION==500

_POSIX_VERSION==200112L, plus (if the XSI option is supported) _XOPEN_UNIX and _XOPEN_VERSION==600

POSIX.1‐2008 does not make any attempt to define application binary interaction with the underlying operating system. However, application developers may find it useful to query _SC_VERSION at runtime via sysconf() to determine whether the current version of the operating system supports the necessary functionality as in the following program fragment:

if (sysconf(_SC_VERSION) < 200809L) {
    fprintf(stderr, "POSIX.1-2008 system required, terminating \n");
    exit(1);
}

New applications should not use _XOPEN_SHM or _XOPEN_ENH_I18N.

As POSIX.1‐2008 evolved, certain options became sufficiently standardized that it was concluded that simply requiring one of the option choices was simpler than retaining the option. However, for backwards-compatibility, the option flags (with required constant values) are retained.

Version Test Macros

The standard developers considered altering the definition of _POSIX_VERSION and removing _SC_VERSION from the specification of sysconf() since the utility to an application was deemed by some to be minimal, and since the implementation of the functionality is potentially problematic. However, they recognized that support for existing application binaries is a concern to manufacturers, application developers, and the users of implementations conforming to POSIX.1‐2008.

While the example using _SC_VERSION in the APPLICATION USAGE section does not provide the greatest degree of imaginable utility to the application developer or user, it is arguably better than a core file or some other equally obscure result. (It is also possible for implementations to encode and recognize application binaries compiled in various POSIX.1-conforming environments, and modify the semantics of the underlying system to conform to the expectations of the application.) For the reasons outlined in the preceding paragraphs and in the APPLICATION USAGE section, the standard developers elected to retain the _POSIX_VERSION and _SC_VERSION functionality.

POSIX.1‐2008 includes support in certain areas for the newly adopted policy governing options and stubs.

This policy provides flexibility for implementations in how they support options. It also specifies how conforming applications can adapt to different implementations that support different sets of options. It allows the following:

1.
If an implementation has no interest in supporting an option, it does not have to provide anything associated with that option beyond the announcement that it does not support it.
2.
An implementation can support a partial or incompatible version of an option (as a non-standard extension) as long as it does not claim to support the option.
3.
An application can determine whether the option is supported. A strictly conforming application must check this announcement mechanism before first using anything associated with the option.

There is an important implication of this policy. POSIX.1‐2008 cannot dictate the behavior of interfaces associated with an option when the implementation does not claim to support the option. In particular, it cannot require that a function associated with an unsupported option will fail if it does not perform as specified. However, this policy does not prevent a standard from requiring certain functions to always be present, but that they shall always fail on some implementations. The setpgid() function in the POSIX.1‐1990 standard, for example, is considered appropriate.

The POSIX standards include various options, and the C-language binding support for an option implies that the implementation must supply data types and function interfaces. An application must be able to discover whether the implementation supports each option.

Any application must consider the following three cases for each option:

1.
Option never supported.

The implementation advertises at compile time that the option will never be supported. In this case, it is not necessary for the implementation to supply any of the data types or function interfaces that are provided only as part of the option. The implementation might provide data types and functions that are similar to those defined by POSIX.1‐2008, but there is no guarantee for any particular behavior.

2.
Option always supported.

The implementation advertises at compile time that the option will always be supported. In this case, all data types and function interfaces shall be available and shall operate as specified.

3.
Option might or might not be supported.

Some implementations might not provide a mechanism to specify support of options at compile time. In addition, the implementation might be unable or unwilling to specify support or non-support at compile time. In either case, any application that might use the option at runtime must be able to compile and execute. The implementation must provide, at compile time, all data types and function interfaces that are necessary to allow this. In this situation, there must be a mechanism that allows the application to query, at runtime, whether the option is supported. If the application attempts to use the option when it is not supported, the result is unspecified unless explicitly specified otherwise in POSIX.1‐2008.

None.

<limits.h>, <stddef.h>, <stdint.h>, <stdio.h>, <sys_socket.h>, <sys_types.h>, <termios.h>, <wctype.h>

The System Interfaces volume of POSIX.1‐2017, access(), alarm(), chown(), close(), confstr(), crypt(), ctermid(), dup(), _Exit(), encrypt(), exec, fchdir(), fchown(), fdatasync(), fork(), fpathconf(), fsync(), ftruncate(), getcwd(), getegid(), geteuid(), getgid(), getgroups(), gethostid(), gethostname(), getlogin(), getopt(), getpgid(), getpgrp(), getpid(), getppid(), getsid(), getuid(), isatty(), lchown(), link(), lockf(), lseek(), nice(), pause(), pipe(), read(), readlink(), rmdir(), setegid(), seteuid(), setgid(), setpgid(), setpgrp(), setregid(), setreuid(), setsid(), setuid(), sleep(), swab(), symlink(), sync(), sysconf(), tcgetpgrp(), tcsetpgrp(), truncate(), ttyname(), unlink(), write()

Portions of this text are reprinted and reproduced in electronic form from IEEE Std 1003.1-2017, Standard for Information Technology -- Portable Operating System Interface (POSIX), The Open Group Base Specifications Issue 7, 2018 Edition, Copyright (C) 2018 by the Institute of Electrical and Electronics Engineers, Inc and The Open Group. In the event of any discrepancy between this version and the original IEEE and The Open Group Standard, the original IEEE and The Open Group Standard is the referee document. The original Standard can be obtained online at http://www.opengroup.org/unix/online.html .

Any typographical or formatting errors that appear in this page are most likely to have been introduced during the conversion of the source files to man page format. To report such errors, see https://www.kernel.org/doc/man-pages/reporting_bugs.html .

2017 IEEE/The Open Group