oss_audigyls - Creative Labs CA106 (AudigyLS/SBLive 24bit)
driver.
Open Sound System driver for Creative Labs Audigy2-LS and SBLive
24bit 7.1 soundcards.
Audigy-LS device characteristics:
- 8/16/24 bit playback/record
- mono/stereo/4/5.1 playback
- 8KHz to 192Khz sample rate.
AUDIGYLS MODELS
There are 2 models of the AudigyLS device: one with an AC97 codec
called the AudigyLS and the one without called the SBLive 7.1. Essentially
they are the same chip but behave a bit differently.
When playing AC3 on the AudigyLS (the one with the AC97 mixer) -
you need to ensure that the igain slider is set to 0.
AUDIGYLS MIXER
- The AudigyLS has 4 mixer controls for each channel.
- The "spread" button will simply duplicate the front audio on the
other 3 channels so that every speaker is playing what the front L/R is
playing.
- LoopBack recording allows you to capture any channel that's playing
audio.
- Record Volume slider just adjusts the input gain.
- Record Source selector selects the input.
- The "recmon" button enables a passthrough of the analog input
signal.
- Monitor Volume slider sets the passthrough gain if recmon is enabled.
- •
- audigyls_spdif_enable=0|1 The Audigy LS has a versa-jack (orange) that can
be set as SPDIF output or the Side-Surround left/right speakers in a 7.1
setup. When set as SPDIF, you can get play PCM/AC3 audio to a
Dolby(R) capable receiver.
- /etc/oss4/conf/oss_audigyls.conf
- Device configuration file.