| laqhp(3) | LAPACK | laqhp(3) |
laqhp - laqhp: row/col scale matrix
subroutine claqhp (uplo, n, ap, s, scond, amax, equed)
CLAQHP scales a Hermitian matrix stored in packed form. subroutine
claqsp (uplo, n, ap, s, scond, amax, equed)
CLAQSP scales a symmetric/Hermitian matrix in packed storage, using
scaling factors computed by sppequ. subroutine dlaqsp (uplo, n, ap,
s, scond, amax, equed)
DLAQSP scales a symmetric/Hermitian matrix in packed storage, using
scaling factors computed by sppequ. subroutine slaqsp (uplo, n, ap,
s, scond, amax, equed)
SLAQSP scales a symmetric/Hermitian matrix in packed storage, using
scaling factors computed by sppequ. subroutine zlaqhp (uplo, n, ap,
s, scond, amax, equed)
ZLAQHP scales a Hermitian matrix stored in packed form. subroutine
zlaqsp (uplo, n, ap, s, scond, amax, equed)
ZLAQSP scales a symmetric/Hermitian matrix in packed storage, using
scaling factors computed by sppequ.
CLAQHP scales a Hermitian matrix stored in packed form.
Purpose:
CLAQHP equilibrates a Hermitian matrix A using the scaling factors in the vector S.
Parameters
UPLO is CHARACTER*1
Specifies whether the upper or lower triangular part of the
Hermitian matrix A is stored.
= 'U': Upper triangular
= 'L': Lower triangular
N
N is INTEGER
The order of the matrix A. N >= 0.
AP
AP is COMPLEX array, dimension (N*(N+1)/2)
On entry, the upper or lower triangle of the Hermitian matrix
A, packed columnwise in a linear array. The j-th column of A
is stored in the array AP as follows:
if UPLO = 'U', AP(i + (j-1)*j/2) = A(i,j) for 1<=i<=j;
if UPLO = 'L', AP(i + (j-1)*(2n-j)/2) = A(i,j) for j<=i<=n.
On exit, the equilibrated matrix: diag(S) * A * diag(S), in
the same storage format as A.
S
S is REAL array, dimension (N)
The scale factors for A.
SCOND
SCOND is REAL
Ratio of the smallest S(i) to the largest S(i).
AMAX
AMAX is REAL
Absolute value of largest matrix entry.
EQUED
EQUED is CHARACTER*1
Specifies whether or not equilibration was done.
= 'N': No equilibration.
= 'Y': Equilibration was done, i.e., A has been replaced by
diag(S) * A * diag(S).
Internal Parameters:
THRESH is a threshold value used to decide if scaling should be done based on the ratio of the scaling factors. If SCOND < THRESH, scaling is done. LARGE and SMALL are threshold values used to decide if scaling should be done based on the absolute size of the largest matrix element. If AMAX > LARGE or AMAX < SMALL, scaling is done.
Author
Univ. of California Berkeley
Univ. of Colorado Denver
NAG Ltd.
CLAQSP scales a symmetric/Hermitian matrix in packed storage, using scaling factors computed by sppequ.
Purpose:
CLAQSP equilibrates a symmetric matrix A using the scaling factors in the vector S.
Parameters
UPLO is CHARACTER*1
Specifies whether the upper or lower triangular part of the
symmetric matrix A is stored.
= 'U': Upper triangular
= 'L': Lower triangular
N
N is INTEGER
The order of the matrix A. N >= 0.
AP
AP is COMPLEX array, dimension (N*(N+1)/2)
On entry, the upper or lower triangle of the symmetric matrix
A, packed columnwise in a linear array. The j-th column of A
is stored in the array AP as follows:
if UPLO = 'U', AP(i + (j-1)*j/2) = A(i,j) for 1<=i<=j;
if UPLO = 'L', AP(i + (j-1)*(2n-j)/2) = A(i,j) for j<=i<=n.
On exit, the equilibrated matrix: diag(S) * A * diag(S), in
the same storage format as A.
S
S is REAL array, dimension (N)
The scale factors for A.
SCOND
SCOND is REAL
Ratio of the smallest S(i) to the largest S(i).
AMAX
AMAX is REAL
Absolute value of largest matrix entry.
EQUED
EQUED is CHARACTER*1
Specifies whether or not equilibration was done.
= 'N': No equilibration.
= 'Y': Equilibration was done, i.e., A has been replaced by
diag(S) * A * diag(S).
Internal Parameters:
THRESH is a threshold value used to decide if scaling should be done based on the ratio of the scaling factors. If SCOND < THRESH, scaling is done. LARGE and SMALL are threshold values used to decide if scaling should be done based on the absolute size of the largest matrix element. If AMAX > LARGE or AMAX < SMALL, scaling is done.
Author
Univ. of California Berkeley
Univ. of Colorado Denver
NAG Ltd.
DLAQSP scales a symmetric/Hermitian matrix in packed storage, using scaling factors computed by sppequ.
Purpose:
DLAQSP equilibrates a symmetric matrix A using the scaling factors in the vector S.
Parameters
UPLO is CHARACTER*1
Specifies whether the upper or lower triangular part of the
symmetric matrix A is stored.
= 'U': Upper triangular
= 'L': Lower triangular
N
N is INTEGER
The order of the matrix A. N >= 0.
AP
AP is DOUBLE PRECISION array, dimension (N*(N+1)/2)
On entry, the upper or lower triangle of the symmetric matrix
A, packed columnwise in a linear array. The j-th column of A
is stored in the array AP as follows:
if UPLO = 'U', AP(i + (j-1)*j/2) = A(i,j) for 1<=i<=j;
if UPLO = 'L', AP(i + (j-1)*(2n-j)/2) = A(i,j) for j<=i<=n.
On exit, the equilibrated matrix: diag(S) * A * diag(S), in
the same storage format as A.
S
S is DOUBLE PRECISION array, dimension (N)
The scale factors for A.
SCOND
SCOND is DOUBLE PRECISION
Ratio of the smallest S(i) to the largest S(i).
AMAX
AMAX is DOUBLE PRECISION
Absolute value of largest matrix entry.
EQUED
EQUED is CHARACTER*1
Specifies whether or not equilibration was done.
= 'N': No equilibration.
= 'Y': Equilibration was done, i.e., A has been replaced by
diag(S) * A * diag(S).
Internal Parameters:
THRESH is a threshold value used to decide if scaling should be done based on the ratio of the scaling factors. If SCOND < THRESH, scaling is done. LARGE and SMALL are threshold values used to decide if scaling should be done based on the absolute size of the largest matrix element. If AMAX > LARGE or AMAX < SMALL, scaling is done.
Author
Univ. of California Berkeley
Univ. of Colorado Denver
NAG Ltd.
SLAQSP scales a symmetric/Hermitian matrix in packed storage, using scaling factors computed by sppequ.
Purpose:
SLAQSP equilibrates a symmetric matrix A using the scaling factors in the vector S.
Parameters
UPLO is CHARACTER*1
Specifies whether the upper or lower triangular part of the
symmetric matrix A is stored.
= 'U': Upper triangular
= 'L': Lower triangular
N
N is INTEGER
The order of the matrix A. N >= 0.
AP
AP is REAL array, dimension (N*(N+1)/2)
On entry, the upper or lower triangle of the symmetric matrix
A, packed columnwise in a linear array. The j-th column of A
is stored in the array AP as follows:
if UPLO = 'U', AP(i + (j-1)*j/2) = A(i,j) for 1<=i<=j;
if UPLO = 'L', AP(i + (j-1)*(2n-j)/2) = A(i,j) for j<=i<=n.
On exit, the equilibrated matrix: diag(S) * A * diag(S), in
the same storage format as A.
S
S is REAL array, dimension (N)
The scale factors for A.
SCOND
SCOND is REAL
Ratio of the smallest S(i) to the largest S(i).
AMAX
AMAX is REAL
Absolute value of largest matrix entry.
EQUED
EQUED is CHARACTER*1
Specifies whether or not equilibration was done.
= 'N': No equilibration.
= 'Y': Equilibration was done, i.e., A has been replaced by
diag(S) * A * diag(S).
Internal Parameters:
THRESH is a threshold value used to decide if scaling should be done based on the ratio of the scaling factors. If SCOND < THRESH, scaling is done. LARGE and SMALL are threshold values used to decide if scaling should be done based on the absolute size of the largest matrix element. If AMAX > LARGE or AMAX < SMALL, scaling is done.
Author
Univ. of California Berkeley
Univ. of Colorado Denver
NAG Ltd.
ZLAQHP scales a Hermitian matrix stored in packed form.
Purpose:
ZLAQHP equilibrates a Hermitian matrix A using the scaling factors in the vector S.
Parameters
UPLO is CHARACTER*1
Specifies whether the upper or lower triangular part of the
Hermitian matrix A is stored.
= 'U': Upper triangular
= 'L': Lower triangular
N
N is INTEGER
The order of the matrix A. N >= 0.
AP
AP is COMPLEX*16 array, dimension (N*(N+1)/2)
On entry, the upper or lower triangle of the Hermitian matrix
A, packed columnwise in a linear array. The j-th column of A
is stored in the array AP as follows:
if UPLO = 'U', AP(i + (j-1)*j/2) = A(i,j) for 1<=i<=j;
if UPLO = 'L', AP(i + (j-1)*(2n-j)/2) = A(i,j) for j<=i<=n.
On exit, the equilibrated matrix: diag(S) * A * diag(S), in
the same storage format as A.
S
S is DOUBLE PRECISION array, dimension (N)
The scale factors for A.
SCOND
SCOND is DOUBLE PRECISION
Ratio of the smallest S(i) to the largest S(i).
AMAX
AMAX is DOUBLE PRECISION
Absolute value of largest matrix entry.
EQUED
EQUED is CHARACTER*1
Specifies whether or not equilibration was done.
= 'N': No equilibration.
= 'Y': Equilibration was done, i.e., A has been replaced by
diag(S) * A * diag(S).
Internal Parameters:
THRESH is a threshold value used to decide if scaling should be done based on the ratio of the scaling factors. If SCOND < THRESH, scaling is done. LARGE and SMALL are threshold values used to decide if scaling should be done based on the absolute size of the largest matrix element. If AMAX > LARGE or AMAX < SMALL, scaling is done.
Author
Univ. of California Berkeley
Univ. of Colorado Denver
NAG Ltd.
ZLAQSP scales a symmetric/Hermitian matrix in packed storage, using scaling factors computed by sppequ.
Purpose:
ZLAQSP equilibrates a symmetric matrix A using the scaling factors in the vector S.
Parameters
UPLO is CHARACTER*1
Specifies whether the upper or lower triangular part of the
symmetric matrix A is stored.
= 'U': Upper triangular
= 'L': Lower triangular
N
N is INTEGER
The order of the matrix A. N >= 0.
AP
AP is COMPLEX*16 array, dimension (N*(N+1)/2)
On entry, the upper or lower triangle of the symmetric matrix
A, packed columnwise in a linear array. The j-th column of A
is stored in the array AP as follows:
if UPLO = 'U', AP(i + (j-1)*j/2) = A(i,j) for 1<=i<=j;
if UPLO = 'L', AP(i + (j-1)*(2n-j)/2) = A(i,j) for j<=i<=n.
On exit, the equilibrated matrix: diag(S) * A * diag(S), in
the same storage format as A.
S
S is DOUBLE PRECISION array, dimension (N)
The scale factors for A.
SCOND
SCOND is DOUBLE PRECISION
Ratio of the smallest S(i) to the largest S(i).
AMAX
AMAX is DOUBLE PRECISION
Absolute value of largest matrix entry.
EQUED
EQUED is CHARACTER*1
Specifies whether or not equilibration was done.
= 'N': No equilibration.
= 'Y': Equilibration was done, i.e., A has been replaced by
diag(S) * A * diag(S).
Internal Parameters:
THRESH is a threshold value used to decide if scaling should be done based on the ratio of the scaling factors. If SCOND < THRESH, scaling is done. LARGE and SMALL are threshold values used to decide if scaling should be done based on the absolute size of the largest matrix element. If AMAX > LARGE or AMAX < SMALL, scaling is done.
Author
Univ. of California Berkeley
Univ. of Colorado Denver
NAG Ltd.
Generated automatically by Doxygen for LAPACK from the source code.
| Fri Aug 9 2024 02:33:22 | Version 3.12.0 |