Device

Select the output device to use Optional. Type uniline.

upstream_default value :

/dev/lcd

Keypad

If you have a keypad connected. Keypad layout is currently not configureable from the config file. Optional. Type uniline.

default value :

yes

Model

Select the LCD model Optional. Type enum. choice: '12232', '12832', '1602'.

upstream_default value :

12232

Reboot

Reinitialize the LCD's BIOS normally you shouldn't need this. Optional. Type boolean.

upstream_default value :

no

Size

Select the LCD size. Default depends on model: 12232: 20x4 12832: 21x4 1602: 16x2. Optional. Type uniline.

default value :

20x4

Speed

Set the communication speed Optional. Type enum. choice: '9600', '19200'.

upstream_default value :

19200

keypad_test_mode

If you have a non-standard keypad you can associate any keystrings to keys. There are 6 input keys in the CwLnx hardware that generate characters from 'A' to 'F'.

The following is the built-in default mapping hardcoded in the driver. You can leave those unchanged if you have a standard keypad. You can change it if you want to report other keystrings or have a non standard keypad. KeyMap_A=Up KeyMap_B=Down KeyMap_C=Left KeyMap_D=Right KeyMap_E=Enter KeyMap_F=Escape keypad_test_mode permits one to test keypad assignment Default value is no. Optional. Type uniline.

upstream_default value :

yes