ipmiutil_picmg - send specific PICMG extended IPMI commands
ipmiutil picmg [-mixNUPREFJTVY] parameters
This ipmiutil picmg subcommand sends specific PICMG/ATCA
extended IPMI commands to the firmware.
This utility can use either the /dev/ipmi0 driver from OpenIPMI,
the /dev/imb driver from Intel, the /dev/ipmikcs driver from valinux, direct
user-space IOs, or the IPMI LAN interface if -N.
Command line options are described below.
- -i 00
- This option specifies a specific FRU ID to show. The input value should be
in hex (0b, 1a, etc.), as shown from the sensor SDR output. The default
FRU ID is zero (0).
- -m 002000
- Show FRU for a specific MC (e.g. bus 00, sa 20, lun 00). This could be
used for PICMG or ATCA blade systems. The trailing character, if present,
indicates SMI addressing if 's', or IPMB addressing if 'i' or not
present.
- -x
- Causes extra debug messages to be displayed.
- -N nodename
- Nodename or IP address of the remote target system. If a nodename is
specified, IPMI LAN interface is used. Otherwise the local system
management interface is used.
- -U rmt_user
- Remote username for the nodename given. The default is a null
username.
- -P/-R rmt_pswd
- Remote password for the nodename given. The default is a null
password.
- -E
- Use the remote password from Environment variable IPMI_PASSWORD.
- -F drv_t
- Force the driver type to one of the followng: imb, va, open, gnu, landesk,
lan, lan2, lan2i, kcs, smb. Note that lan2i means lan2 with intelplus. The
default is to detect any available driver type and use it.
- -J
- Use the specified LanPlus cipher suite (0 thru 17): 0=none/none/none,
1=sha1/none/none, 2=sha1/sha1/none, 3=sha1/sha1/cbc128,
4=sha1/sha1/xrc4_128, 5=sha1/sha1/xrc4_40, 6=md5/none/none, ...
14=md5/md5/xrc4_40. Default is 3.
- -T
- Use a specified IPMI LAN Authentication Type: 0=None, 1=MD2, 2=MD5,
4=Straight Password, 5=OEM.
- -V
- Use a specified IPMI LAN privilege level. 1=Callback level, 2=User level,
3=Operator level, 4=Administrator level (default), 5=OEM level.
- -Y
- Yes, do prompt the user for the IPMI LAN remote password. Alternatives for
the password are -E or -P.
picmg parameters
- properties
- Get PICMG properties may be used to obtain and print Extension major
version information, PICMG identifier, FRU Device ID and Max FRU Device
ID.
- addrinfo
-
Get address information. This command may return information
on the Hardware address, IPMB-0 Address, FRU ID, Site/Entity ID, and
Site/Entity Type.
- frucontrol
fru id options
-
Set various control options:
- 0x00 - Cold Reset
-
- 0x01 - Warm Reset
-
- 0x02 - Graceful Reboot
-
- 0x03 - Issue Diagnostic Interrupt
-
- 0x04 - Quiesce [AMC only]
-
- 0x05-0xFF - Cold Reset
-
- activate fru
id
-
Activate the specified FRU.
- deactivate
fru id
-
Deactivate the specified FRU.
- policy get
fru id
-
Get FRU activation policy.
- policy
set fru id lockmask lock
-
Set FRU activation policy. lockmask is 1 or 0 to
indicate action on the deactivation or activation locked bit
respectively. lock is 1 or 0 to set/clear locked bit.
- portstate
set|getall|getgranted|getdenied
parameters
-
Get or set various port states. See usage for parameter
details.
ipmiutil picmg properties
Gets PICMG properties from the default target address (slave address
0x20).
ipmiutil picmg -N 192.168.1.1 -U root -P pswd addrinfo
Gets PICMG Address Information from the specified IP address.
ipmiutil(8) ialarms(8) iconfig(8) idiscover(8) ievents(8) ifru(8)
igetevent(8) ihealth(8) ilan(8) ireset(8) isel(8) isensor(8) iserial(8)
isol(8) iwdt(8)
See http://ipmiutil.sourceforge.net/ for the latest version of
ipmiutil and any bug fix list.
Copyright (C) 2010 Kontron America, Inc.
See the file COPYING in the distribution for more details
regarding redistribution.
This utility is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY.
Andy Cress <arcress at users.sourceforge.net>