NAME

trackalert.conf - configuration file for trackalert daemon

DESCRIPTION

This file is read by trackalert and is a Lua script containing Lua commands to implement (a) configuration of the trackalert daemon and (b) functions that control the operation of the trackalert daemon in response to HTTP commands, specifically “report”.

An alternative version of this file can be specified with

trackalert -C private_trackalert.conf ...
    

CONFIGURATION-ONLY FUNCTIONS

The following functions are for configuration of trackalert only, and cannot be called inside the report or background functions:

•

setACL(<list of netmasks>) - Set the access control list for the HTTP Server. For example, to allow access from any IP address, specify:

•

addACL(<netmask>) - Add a netmask to the access control list for the HTTP server. For example, to allow access from 127.0.0.0/8, specify:

•

addCustomWebHook(<custom webhook name>, <config key map>) - Add a custom webhook, i.e. one which can be called from Lua (using “runCustomWebHook()” - see below) with arbitrary data, using the specified configuration keys. See trackalert_webhook(5) for the supported config keys, and details of the HTTP(S) POST sent to webhook URLs. For example:

•

addCustomStat(<stat name>) - Add a custom counter which can be used to track statistics. The stats for custom counters are logged every 5 minutes. The counter is incremented with the “incCustomCounter” command. For example:

•

webserver(<IP:port>, <password>) - (deprecated - see addListener() instead) Listen for HTTP commands on the specified IP address and port. The password is used to authenticate client connections using basic authentication. For example:

•

addListener(<IP:port>, <useSSL>, <cert file>, <key file>, <options>) - (replacement for webserver()) Listen for HTTP commands on the specified IP address and port. If useSSL is true, then HTTPS must be used, and cert_file and key file are used, otherwise they are empty. Options contains a list of key value pairs to configure the TLS connection; these follow the command line option names in https://www.openssl.org/docs/manmaster/man3/SSL_CONF_cmd.html. For example, “min_protocol” to set the minimum TLS protocol version. You can add as many listeners as you choose. For example:

•

setWebserverPassword(<Password>) - (replacement for webserver password parameter) Sets the basic authentication password for access to the webserver. This has been decoupled from the addListener() command because multiple listeners can now be created, which was not previously possible. For example:

•

controlSocket(<IP[:port]>) - Listen for control connections on the specified IP address and port. If port is not specified it defaults to 5199. For example:

•

setKey(<key>) - Use the specified key for authenticating connections from siblings. The key must be generated with makeKey() from the console. See trackalert(1) for instructions on running a console client. Returns false if the key could not be set (e.g. invalid base64). For example:

•

setNumLuaStates(<num states>) - Set the number of Lua Contexts that will be created to run report commands. Defaults to 10 if not specified. See also setNumReportThreads() and setNumSchedulerThreads(). Should be at least equal to NumReportThreads + NumSchedulerThreads. For example:

•

setNumWorkerThreads(<num threads>) - Set the number of threads in the pool used to receive webserver commands. Note that the report function itself is run in a separate report thread pool controlled by setNumReportThreads(). Defaults to 4 if not specified. For example:

•

setMaxWebserverConns(<max conns>) - Set the maximum number of active connections to the webserver. This can be used to limit the effect of too many queries to trackalert. It defaults to 10,000. For example:

•

setNumReportThreads(<num threads>) - Set the number of threads in the pool used to run Lua report functions. Each thread uses a separate Lua Context, (see setNumLuaStates()). Defaults to 6 if not specified. For example:

•

setNumSchedulerThreads(<num threads>) - Set the number of threads in the pool used to run scheduled background Lua functions. Each thread uses a separate Lua Context, the number of which is set with setNumLuaStates(). Defaults to 4 if not specified. For example:

•

setNumWebHookThreads(<num threads>) - Set the number of threads in the pool used to send webhook events. Defaults to 4 if not specified. For example:

•

newGeoIP2DB(<db name>, <filename>) - Opens and initializes a GeoIP2 database. A name must be chosen, and the filename of the database to open must also be supplied. To obtain an object allowing lookups to be performed against the database, use the getGeoIP2DB() function. For example:

•

initGeoIPDB() - (Deprecated - use newGeoIP2DB()). Initializes the country-level IPv4 and IPv6 GeoIP databases. If either of these databases is not installed, this command will fail and trackalert will not start. For example:

•

initGeoIPCityDB() - (Deprecated - use newGeoIP2DB()). Initializes the city-level IPv4 and IPv6 GeoIP databases. If either of these databases is not installed, this command will fail and trackalert will not start. Ensure these databases have the right names if you’re using the free/lite DBs - you may need to create symbolic links e.g. GeoIPCityv6.dat -> GeoLiteCityv6.dat. For example:

•

initGeoIPISPDB() - (Deprecated - use newGeoIP2DB()). Initializes the ISP-level IPv4 and IPv6 GeoIP databases. If either of these databases is not installed, this command will fail and trackalert will not start. For example:

•

setNumWebHookThreads(<num threads>) - Set the number of threads in the pool used to send webhook events. Defaults to 5 if not specified. For example:

•

setNumWebHookConnsPerThread(<num conns>) - Set the maximum number of connections used by each WebHook thread. Defaults to 10 if not specified. This setting replaces the deprecated “num_conns” per-hook configuration setting. For example:

•

setWebHookQueueSize(<queue size>) - Set the size of the queue for webhook events. If the queue gets too big, then webhooks will be discarded, and an error will be logged. The default queue size is 50000, which should be appropriate for most use-cases.

•

setWebHookTimeoutSecs(<timeout secs>) - Set the maximum time a request can take for webhooks. For example:

•

setReport(<report func>) - Tell trackalert to use the specified Lua function for handling all “report” commands. For example:

•

setBackground(<name>, <lua function> - The setBackground function registers a background function with a given name. The name is used when scheduling the function using the xxxScheduleBackgroundFunc() functions.

•

cronScheduleBackgroundFunc(<cron string>, <background function name>) - Tells trackalert to run the specified function according to the given cron schedule (note the name given in setBackground() is used, not the actual function name). Note that cron ranges are not currently supported - if you want to schedule the same function to run for example on two different days of the week, then you would use two different calls to this function to achieve that. For example:

•

intervalScheduleBackgroundFunc(<duration string>, <background function name>) - Tells trackalert to run the specified function at the interval given in duration string. The duration string is of the format h[h][:mm][:ss], so for example “10” would indicate an interval of 10 hours, “00:00:01” would indicate an interval of 1 second, and “5:01” would indicate an interval of 5 hours and 1 minute. For example:

•

setCustomEndpoint(<name of endpoint>, <custom lua function>) - Create a new custom REST endpoint with the given name, which when invoked will call the supplied custom lua function. This allows admins to arbitrarily extend the trackalert REST API with new REST endpoints. Admins can create as many custom endpoints as they require. Custom endpoints can only be accessed via a POST method, and all arguments are passed as key-value pairs of a top-level “attrs” json object (these will be split into two tables - one for single-valued attrs, and the other for multi-valued attrs - see CustomFuncArgs below). Return information is passed with a boolean “success” and “r_attrs” json object containing return key-value pairs. For example:

•

disableCurlPeerVerification() - Disable checking of peer certificates in all outbound HTTPS connections. This is not recommended except for debugging or development purposes. For example:

•

disableCurlHostVerification() - Disable checking of the hostname in the peer certificate for all outbound HTTPS connections. This is not recommended except for debugging or development purposes.

•

setCurlCABundleFile(<Path to CA File>) - Gives the location of a file containing the certificate authorities to use for checking HTTPS server certificates. Use this if the standard installed root certs do not contain the certs you need. This should be a file containing 1:N certs in PEM format.

•

setCurlClientCertAndKey(<Path to Cert File>, <Path to Key File>) - Gives the location of the certificate and key files to use for mutual TLS authentication (in PEM format).

•

setMetricsNoPassword() - Disable password protection for the /metrics endpoint.

GENERAL FUNCTIONS

The following functions are available anywhere; either as part of the configuration or within the allow/report/reset functions:

•

getGeoIP2DB(<db name>) - Return an object which can be used to perform GeoIP lookups. The database must first be initialised using newGeoIP2DB(). For example:

•

GeoIP2DB:lookupCountry(<ComboAddress>) - Returns the two-character country code of the country that the IP address is located in. A ComboAddress object can be created with the newCA() function. For example:

•

GeoIP2DB:lookupISP(<ComboAddress>) - Returns the name of the ISP hosting the IP address. A ComboAddress object can be created with the newCA() function. For example:

•

GeoIP2DB:lookupCity(<ComboAddress>) - Returns a map containing information about the IP address, such as the city name and latitude and longitude. See GeoIPRecord below for the full list of fields. For example:

•

lookupCountry(<ComboAddress>) - (Deprecated - use the new GeoIP2 function). Returns the two-character country code of the country that the IP address is located in. A ComboAddress object can be created with the newCA() function. For example:

•

lookupISP(<ComboAddress>) - (Deprecated - use the new GeoIP2 function). Returns the name of the ISP hosting the IP address. A ComboAddress object can be created with the newCA() function. For example:

•

lookupCity(<ComboAddress>) - (Deprecated - use the new GeoIP2 function). Returns a map containing information about the IP address, such as the city name and latitude and longitude. See GeoIPRecord below for the full list of fields. For example:

•

newCA(<IP[:port]>) - Create and return an object representing an IP address (v4 or v6) and optional port. The object is called a ComboAddress. For example:

•

ComboAddress:tostring() - Return a string representing the IP address. For example:

•

newNetmaskGroup() - Return a NetmaskGroup object, which is a way to efficiently match IPs/subnets against a range. For example:

•

NetmaskGroup:addMask(<cidr>) - Add a mask to the NetmaskGroup, in cidr format. For example:

•

NetmaskGroup:match(<ip address>) - Match an IP address against a NetmaskGroup. The IP address must be a ComboAddress object. For example:

•

runCustomWebHook(<custom webhook name>, <webhook data>) - Run a previously configured custom webhook, using the supplied webhook data. By default the Content-Type of the data is “application/json”, however this can be changed using the “content-type” config key when configuring the custom webhook. Custom webhooks are run using the same thread pool as normal webhooks. For example:

•

infoLog(<log string>, <key-value map>) - Log at LOG_INFO level the specified string, adding “key=value” strings to the log for all the kvs specified in the key-value map. For example:

•

vinfoLog(<log string>, <key-value map>) - Log at LOG_INFO level the specified string, adding “key=value” strings to the log for all the kvs specified in the key-value map, but only if trackalert was started with the (undocumented) -v flag (for verbose). For example:

•

warnLog(<log string>, <key-value map>) - Log at LOG_WARN level the specified string, adding “key=value” strings to the log for all the kvs specified in the key-value map. For example:

•

errorLog(<log string>, <key-value map>) - Log at LOG_ERR level the specified string, adding “key=value” strings to the log for all the kvs specified in the key-value map. For example:

•

debugLog(<log string>, <key-value map>) - Log at LOG_DEBUG level the specified string, adding “key=value” strings to the log for all the kvs specified in the key-value map, but only if trackalert was started with the (undocumented) -v flag (for verbose). For example:

•

LoginTuple - The only parameter to the report function is a LoginTuple table. This table contains the following fields:

•

LoginTuple.remote - An IP address of type ComboAddress, representing the system performing login.

•

LoginTuple.login - The username of the user performing the login.

•

LoginTuple.pwhash - A hashed representation of the users password

•

LoginTuple.success - Whether the user login was successful.

•

LoginTuple.policy_reject - If the login was not successful only because of a policy-based reject from trackalert (i.e. the username and password were correct).

•

LoginTuple.attrs - Additional array of (single valued) attributes about the login, e.g. information about the user from LDAP. For example:

•

LoginTuple.attrs_mv - Additional array of (multi-valued) attributes about the login. For example:

•

LoginTuple.device_id - An optional string that represents the device that the user logged in from. Also see device_attrs.

•

LoginTuple.device_attrs - Additional array of attributes about the device, which is parsed from the device_id string. The protocol string is used to determine how to parse device_id, so that MUST also be present. If device_attrs is already populated, it will be used as-is. For all protocols, the following keys are set wherever possible: os.family, os.major, os.minor. For http, the following additional keys are set wherever possible: device.family, device.model, device.brand, browser.family, browser.major, browser.minor. For imap, the following additional keys are set wherever possible: imapc.family, imapc.major, imapc.minor. For mobileapi, the following additional keys are set: app.name, app.brand, app.major, app.minor, device.family. For example:

•

LoginTuple.protocol - A string representing the protocol that was used to access mail, i.e. http, imap, pop3, mobileapi etc. LoginTuple.protocol MUST be set in order to parse device_id into device_attrs, however currently only http, imap and mobileapi are recognized protocols when parsing device_id. For example:

•

LoginTuple.tls - A boolean representing whether the login session used TLS or not. If the client is using TLS offload proxies then it may be set to false.

•

GeoIPRecord - The type returned by the lookupCity() function. See below for fields:

•

GeoIPRecord.country_code - The two-letter country code e.g. “US”.

•

GeoIPRecord.country_name - The country name, e.g. “United States”

•

GeoIPRecord.region - The region, e.g. “CA”

•

GeoIPRecord.city - The city name, e.g. “Mountain View”

•

GeoIPRecord.postal_code - The postal code, e.g. “93102” or “BA216AS”

•

GeoIPRecord.latitude - The latitude, e.g. 37.386001586914

•

GeoIPRecord.longitude - The longitude, e.g. -122.08380126953

•

CustomFuncArgs - The only parameter to custom functions is a CustomFuncArgs table. This table contains the following fields:

•

CustomFuncArgs.attrs - Array of (single valued) attributes supplied by the caller. For example:

•

CustomFuncArgs.attrs_mv - Array of (multi-valued) attributes supplied by the caller. For example:

•

incCustomStat(<stat name>) - Increment a custom statistics counter. The value of the counter will be logged every 5 minutes, and then reset. For example:

FILES

/etc/wforce/trackalert.conf

SEE ALSO

trackalert(1)

AUTHORS

Open-Xchange.