TRICKLE(1) General Commands Manual TRICKLE(1)

trickle — a lightweight userspace bandwidth shaper

trickle [-h] [-v] [-V] [-s] [-d rate[:schedule]] [-u rate[:schedule]] [-w length] [-t time] [-l length] [-n path] command ...

trickle is a userspace bandwidth manager. Currently, trickle supports the shaping of any SOCK_STREAM (see socket(2)) connection established via the socket(2) interface. Furthermore, trickle will not work with statically linked executables, nor with setuid(2) executables. trickle is highly configurable; download and upload rates can be set separately, or in an aggregate fashion.

The options are as follows:

Displays help.
Increases the verbosity level (can be specified multiple times).
Prints version.
Runs trickle in standalone mode, independent of trickled(8).
rate[:schedule]
Limit the download bandwidth consumption to rate KB/s. The default value is 10 KB/s. Optionally, set a schedule to follow.
rate[:schedule]
Limit the upload bandwidth consumption to rate KB/s. The default value is 10 KB/s. Optionally, set a schedule to follow.
length
Set peak detection window size to length KB. This determines how aggressive trickle is at eliminating bandwidth consumption peaks. Lower values will be more aggressive, but may also result in over shaping. The default value (512 KB) is usually sufficient.
seconds
Set smoothing time to seconds s. The smoothing time determines with what intervals trickle will try to let the application transcieve data. Smaller values will result in a more continuous (smooth) session, while larger values may produce bursts in the sending and receiving data. Smaller values (0.1 - 1 s) are ideal for interactive applications while slightly larger values (1 - 10 s) are better for applications that need bulk transfer. The default value is 3 seconds.
length
Set smoothing length to length KB. The smoothing length is a fallback of the smoothing time. If trickle cannot meet the requested smoothing time, it will instead fall back on sending length KB of data. The default value is 10 KB.
path
Use trickled(8) socket path to communicate with trickled(8). By default, /tmp/.trickled.sock is used.

Both the -u and -d flags accept one or more optional schedules, specified in the following form:

:[days_of_week][start_time],[end_time],[rate]

days_of_week may be any of Su M T W Th F Sa in any order. If no day is specified, the schedule will apply for all days.

start_time is the 3-or-4-digit 24-hour local time to begin the new bandwidth schedule. For example, 1234 would mean 12:34 PM. 123 would mean 1:23 AM. 2345 would mean 11:45 PM.

end_time is the 3-or-4-digit 24-hour local time to end the bandwidth schedule.

rate is the bandwidth limit (in KB/s) that is enforced during the specified time.

Multiple schedules can be string together on the command line. If the schedules overlap, the last one takes precident.

trickle -u 10 -d 20 ncftp

Launch ncftp(1) limiting its upload capacity to 10 KB/s, and download capacity at 20 KB/s.

trickle -d 50 -u 10:WSaSu130,145,1000:MTTh1200,300,96 rsync ...

Launch rsync(1) limiting the bandwidth as follows:

trickle -s -u 100 -d 10000:900,1700,10" wget ...

Launch wget(1) in standalone mode, limiting the bandwidth as follows:

trickled(8), syslog(3), socket(2), netintro(4)

trickle has been developed by Marius Aamodt Eriksen ⟨marius@monkey.org⟩.

Does not support executables utilizing kqueue(2). Does not support statically linked executables.

November 10, 2002 Debian