datenklo - http://osmocom-analog.eversberg.eu/docs/
datenklo [options] -M <mode>
-h --help
- This help
--config [~/]<path to config file>
- Give a config file to use. If it starts with '~/', path is at home dir.
Each line in config file is one option, '-' or '--' must not be
given!
-v --verbose <level> |
<level>,<category>[,<category>[,...]] | list
- Use 'list' to get a list of all levels and categories. Verbose level:
digit of debug level (default = '3') Verbose level+category: level digit
followed by one or more categories -> If no category is specified, all
categories are selected
-v --verbose date
- Show date with debug output
-T --am791x-type 7910 | 7911
- Give modem chip type. (Default = 7911)
-M --mc <mode>
- Give mode setting of AM7910/AM71911, use 'list' to list all modes.
-A --auto-rts
- Automatically rais and drop modem's RTS line for half duplex operation. TX
data will be queued while remote carrier is detected.
-B --baudrate <RX rate> <TX rate>
- Given baud rate will override the baud rate given by ioctl. A baud rate of
<= 150 Bps for TX and/or RX will attach TX and/or RX to the back
channel instead of the main channel.
-D --device
- Device name. The prefix '/dev/ is automatically added, if not given.
(default = '/dev/ttyDATENKLO0')
-S --stereo
- Generate two devices. One device connects to the left and the other to the
right channel of the audio device. The device number in the device name is
automatically increased by one. You must also define the mode twice.
(-M <mode> -M <mode>)
-a --audio-device
hw:<card>,<device>
- Sound card and device number (default = 'hw:0,0')
-s --samplerate <rate>
- Sample rate of sound device (default = '48000')
-b --buffer <ms>
- How many milliseconds are processed in advance (default = '50')
-l --loopback <type>
- Perform audio loopback to test modem. type 1: Audio from transmitter is
fed into receiver (analog loopback) type 2: Audio is crossed between two
modem instances. (use with -S)
--fast-math
- Use fast math approximation for slow CPU / ARM based systems.
--write-rx-wave <file>
- Write received audio to given wave file.
--write-tx-wave <file>
- Write transmitted audio to given wave file.
--read-rx-wave <file>
- Replace received audio by given wave file.
--read-tx-wave <file>
- Replace transmitted audio by given wave file.